311 transistor wiki4/30/2023 5.4.14 How to deal with: Graphic Equalizer.5.4.13 How to deal with: Envelope filter.5.4.9 How to deal with: Feedback Send/Return.5.4.8 How to deal with: Stereo Enhancer.5.4.7 How to deal with: Effects Loop (FXL).5.4.1 How to deal with: Chorus and Quad-Chorus.5.3.8 How to optimize your room tone as well as the FOH tone.5.3.6 How to set the speaker resonance parameter.5.3.5 How to use a 3rd-party Impulse Reponse (IR or user cab).5.3.4 How to use the Air and Drive parameters.5.3.3 How to choose between a stereo or mono cabinet.5.2.17 Frequency curves of the amp tonestacks.5.2.16 How to get your guitar to feedback.5.2.15 How to solve the "my tone changes when I start editing the Amp block" issue.5.2.14 How to use multiple amps in a single preset.5.2.13 How to prevent crossover distortion.5.2.12 How to add another (tube) gain stage.5.2.11 How to use a Drive block to add or control gain.5.2.9 How to split the preamp and poweramp sections of the amp sim.5.2.8 How to set Damp, Sag, Depth and advanced parameters.5.2.4 How to use the amp tone controls (tonestack).5.2.3 How to set the Drive and Master controls.5.2.2 How to dial in amps on the Axe-Fx.5.2.1 How to know which real amps the Axe-Fx models.5.1 How to know which effects the Axe-Fx provides.4.28 How to insert an external pedal in the routing.4.27 How to keep your presets organized.4.25 How to minimize gaps in the signal when switching presets.4.24 How to save and recall favorite amp settings (Global amp).4.23 How to enable global control of any effects block.4.22 How to enable delay and reverb spillover.4.21 How to decide where to put the Cab block.4.18 How to adjust the volume level (per preset) while playing.4.17 How to set the volume level of an effect.4.16 How to set the correct bypass mode for an effect.4.15 How to run an effect in stereo or mono.4.14 How to create a master bypass switch.4.13 How to put Axe-Fx effects before or after your own preamp.4.12 How to deal with effects in a parallel row.4.11 How to add an effect block to a preset.4.10 How to insert more than 12 effects in a preset.4.9 How to adjust the global effects level or the master reverb level.4.8 How to reset an effect to its default settings.4.7 How to copy and paste effect settings between presets.4.1 How to edit presets on your computer.2.19 How to adjust the overall tone and volume level.2.18 How to mute the signal in tuning mode.2.16 How to make a digital connection (Spdif).2.14 How to set the output levels and avoid clipping.2.10 How to use it for effects only (effects processor).2.8 How to set it up for mono or stereo output.2.7 How to use it with your own guitar amplifier.2.6 How to use it with your own power amp and speaker cabinet.2.4 How to connect it directly to a mixing table.1.7 How to mount it in a rack or rackbag.1.6 How to view and hear the Axe-Fx in action.1.5 How to find the right factory preset.1.3 How to make sure it is set up correctly (gig checklist).1.2 How to get started quickly (for new users).1.1 How to keep your knowledge up-to-date.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |